Bj.....?

  • Mini Motor mit VrAchse Bj..?
    Was ich weiß:
    Achse mit Trommelbremse
    No.07L(BenzinpumpeLinks)
    No.12A
    497(BenzinpumpeRechts)
    No.10/080 Motor Benzinp.Seite
    No.12G787 Krümmer
    No.26J3 Wassereinl.(Vent.deckel)
    Wo noch?(Kucken)
    Wer braucht sowas?(Verkaufen)

  • Hi Kai,

    die korrekte Motor.Nr. müsste auf einer angegossenen Fläche neben der 1.Zündkerze (rechts) unter dem Zyl-Kopf stehen. z.B.:

    Size: 998cc:
    9WR 998 Wolseley/ Riley MK II without crankcase gas recycling 36HP
    9AD same, but remote gear, crank case recycling, 39HP
    9AE 998 Wolseley/ Riley MK III
    99H/-/101 Wolseley/ Riley, Mini Clubman, Mini 1000 from 1970 on with dished pistons
    99H/791 Mini 1000 1974 on with dished pistons
    99H/997 A+ block from 1980 on with flat pistons and 2.95 diff
    99H/A97P A+ with dished pistons, pre-A+ gears, 3.44 diff and 12" wheels

    Size: 1275:
    12G/Ta/H Wolseley/ Riley/ VP 1300 with S-Conrods
    12H739 1275GT with electric fuelpump and dynamo, 53HP
    12H380 same with alternator and remote gear
    12H389 same as 12H379, but mechanic fuel pump
    12H390 same as 12H389, but alternator
    12H706 same as 12H380, but rod gear change
    12H397 Cooper S MK III with dynamo, 73HP
    12H398 Cooper SMK III with alternator
    12H/-/ 1275 Allegro, Austion 1300, 53HP
    12H610/635 Innocenti Cooper with duplex chain, 64HP
    12H719/832 same with simplex chain and tensioner
    12H832XH De Tomaso 120L 70HP
    12H996A MG Metro
    12H959aa MG Metro Turbo 93HP
    12A/2A Cooper 1300 from 1990 on without cat
    12A/2B Cooper 1300 from 1990 on with cat
    12A/2D Cooper 1300 from 1992 on with injection

    Size: 1100cc:
    10AMW/Ta Clubman estate and Austin 1100 45HP
    10H791 Clubman 1100
    10GR/Ta/H MG1100
    10GRB/Ta/H MG1100/ Wolseley 1100
    10V/Ta/H Vanden Plas 1100

    Engine numbers, Metro
    Block number starting:
    12H907 is standard 1275 Metro, pre October '84
    12H996 is MG metro

    Die Angabe HP steht für Horse-Power (PS)

    Gruß Matz

    1.3i SPI Bj 96, AHK 500/370kg, ab Kat RC40, 4Kolben-Metro-Bremse
    Member of MINI-Club- Montabaur/Ww

  • Thanx Matze
    werde ich doch gleich mal heute probieren!
    Write Back tomorrow
    see yuo...............KaB

Jetzt mitmachen!

Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!